AISI 1005 Pins
AISI 1005 is a very low carbon steel (0.06% C max) valued for its excellent ductility, formability and weldability. It is supplied mainly as wire, rod, strip and sheet for cold-forming and general-purpose parts where high strength is not required.
This page carries the material information from the AISI 1005 grade page into the Pins product-form page.
AISI 1005 Pins
Browse the product-form pages for this material grade.
About dimensions: these tables reproduce the grade-specific material data from the matching grade page. Fastener dimensions and tolerances depend on the applicable product standard, nominal size, thread and class; they cannot be determined from the material grade alone.
Chemical Composition
Composition values copied from the AISI 1005 material page.
| Element | Symbol | Composition |
|---|---|---|
| Carbon | C | 0.06 Max |
| Manganese | Mn | 0.35 Max |
| Phosphorus | P | 0.040 Max |
| Sulfur | S | 0.050 Max |
| Iron | Fe | Balance |
Use the governing material specification and product-form requirements for certified limits.
Mechanical Properties
Mechanical values copied from the AISI 1005 material page.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | Approx. 330 | MPa |
| Yield Strength | Approx. 260 | MPa |
| Elongation | Approx. 23 | % |
| Hardness | Approx. 95 | HB |
Verify values against the applicable specification, size range, heat treatment and supply condition before design or purchasing.