Grade 5 Bolting Products
Titanium Grade 5 is listed in the TITANIUM ALLOY material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for Titanium Grade 5 lists Carbon (C): 0.08% Max; Nitrogen (N): 0.05% Max; Hydrogen (H): 0.015% Max; Iron (Fe): 0.40% Max. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for Titanium Grade 5 lists Tensile Strength: 895 Minimum MPa; Yield Strength: 828 Minimum MPa; Elongation: 10 Minimum %; Hardness: 310 Maximum HB. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
Werkstoff / EN cross-reference for Titanium Grade 5: 3.7165. This comparison does not guarantee interchangeability; confirm chemistry, product form and condition against the governing specification.
View Technical Information →Standard identification and material designation information for Titanium Grade 5.
The reference chemistry table lists Carbon (C): 0.08% Max; Nitrogen (N): 0.05% Max; Hydrogen (H): 0.015% Max; Iron (Fe): 0.40% Max. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element | Symbol | Composition |
|---|---|---|
| Carbon | C | 0.08% Max |
| Nitrogen | N | 0.05% Max |
| Hydrogen | H | 0.015% Max |
| Iron | Fe | 0.40% Max |
| Oxygen | O | 0.20% Max |
| Aluminium | Al | 5.50 – 6.75% |
| Vanadium | V | 3.50 – 4.50% |
| Titanium | Ti | Balance |
The table reports Tensile Strength: 895 Minimum MPa; Yield Strength: 828 Minimum MPa; Elongation: 10 Minimum %; Hardness: 310 Maximum HB as reference data for Titanium Grade 5. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | 895 Minimum | MPa |
| Yield Strength | 828 Minimum | MPa |
| Elongation | 10 Minimum | % |
| Hardness | 310 Maximum | HB |
Titanium Grade 5 provides an exceptional combination of high strength, low density, corrosion resistance and reliable engineering performance.
Provides substantially higher strength than commercially pure titanium grades.
Combines high mechanical strength with the low density of titanium.
Performs reliably in many demanding chemical and marine environments.
Suitable for demanding applications involving repeated loading and stress.
Titanium Grade 5 is selected for demanding applications requiring high strength, low weight and excellent corrosion resistance.
Aircraft structures, components and high-performance aerospace fasteners.
High-performance components used in demanding marine environments.
Components requiring high strength and corrosion-resistant performance.
High-performance engineered components requiring strength and low weight.
Mechanical properties can vary depending on product form, heat treatment and manufacturing condition.
Appropriate machining, forming and welding procedures are required for reliable material performance.
Grade 5 is generally selected where high strength and low weight are more important than maximum ductility.
The commonly listed Werkstoff / EN cross-reference for Titanium Grade 5 is 3.7165. Treat this as a grade comparison, not a guarantee of interchangeability. Verify chemistry, product form, condition and governing specification against the supplier certificate before substitution.
It is commonly used in aerospace, marine, chemical processing, medical and other high-performance engineering applications.
Yes. Titanium Grade 5 provides substantially higher mechanical strength than commercially pure Titanium Grade 1.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.