Grade 2 Bolting Products
Titanium Grade 2 is listed in the TITANIUM ALLOY material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for Titanium Grade 2 lists Carbon (C): 0.08% Max; Nitrogen (N): 0.03% Max; Hydrogen (H): 0.015% Max; Iron (Fe): 0.30% Max. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for Titanium Grade 2 lists Tensile Strength: 345 Minimum MPa; Yield Strength: 275 Minimum MPa; Elongation: 20 Minimum %; Reduction of Area: 30 Minimum %. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
Werkstoff / EN cross-reference for Titanium Grade 2: 3.7035. This comparison does not guarantee interchangeability; confirm chemistry, product form and condition against the governing specification.
View Technical Information →Standard identification and material designation information for Titanium Grade 2.
The reference chemistry table lists Carbon (C): 0.08% Max; Nitrogen (N): 0.03% Max; Hydrogen (H): 0.015% Max; Iron (Fe): 0.30% Max. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element | Symbol | Composition |
|---|---|---|
| Carbon | C | 0.08% Max |
| Nitrogen | N | 0.03% Max |
| Hydrogen | H | 0.015% Max |
| Iron | Fe | 0.30% Max |
| Oxygen | O | 0.25% Max |
| Titanium | Ti | Balance |
The table reports Tensile Strength: 345 Minimum MPa; Yield Strength: 275 Minimum MPa; Elongation: 20 Minimum %; Reduction of Area: 30 Minimum % as reference data for Titanium Grade 2. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | 345 Minimum | MPa |
| Yield Strength | 275 Minimum | MPa |
| Elongation | 20 Minimum | % |
| Reduction of Area | 30 Minimum | % |
Titanium Grade 2 provides a combination of excellent corrosion resistance, low density and good fabrication properties.
Performs well in demanding chemical and marine environments.
Offers higher strength than Titanium Grade 1.
Suitable for fabrication and forming applications.
Can be fabricated using appropriate welding procedures.
Titanium Grade 2 is selected for applications requiring corrosion resistance and reliable material performance.
Process equipment and corrosion-resistant components.
Components exposed to demanding seawater environments.
Equipment requiring corrosion-resistant heat transfer surfaces.
Fabricated equipment used in demanding industrial environments.
Consider chemical concentration, contaminants and operating temperature when selecting the material.
Appropriate fabrication and welding procedures are required to maintain material performance.
Grade 2 is selected where a balance of corrosion resistance and mechanical strength is required.
The commonly listed Werkstoff / EN cross-reference for Titanium Grade 2 is 3.7035. Treat this as a grade comparison, not a guarantee of interchangeability. Verify chemistry, product form, condition and governing specification against the supplier certificate before substitution.
It is commonly used in chemical processing, marine environments, heat exchangers and corrosion-resistant industrial equipment.
Yes. Titanium Grade 2 provides excellent corrosion resistance in many demanding industrial environments.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.