ZERON 100 Bolting Products
ZERON 100 is listed in the SUPER DUPLEX STAINLESS STEEL material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for ZERON 100 lists Carbon (C): 0.03% Max; Manganese (Mn): 1.00% Max; Silicon (Si): 1.00% Max; Phosphorus (P): 0.03% Max. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for ZERON 100 lists Tensile Strength: 750 Minimum MPa; Yield Strength: 550 Minimum MPa; Elongation: 25 Minimum %; Hardness: 270 Maximum HB. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
Werkstoff / EN cross-reference for ZERON 100: 1.4501. This comparison does not guarantee interchangeability; confirm chemistry, product form and condition against the governing specification.
View Technical Information →Standard identification and material designation information for ZERON 100.
The reference chemistry table lists Carbon (C): 0.03% Max; Manganese (Mn): 1.00% Max; Silicon (Si): 1.00% Max; Phosphorus (P): 0.03% Max. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element | Symbol | Composition |
|---|---|---|
| Carbon | C | 0.03% Max |
| Manganese | Mn | 1.00% Max |
| Silicon | Si | 1.00% Max |
| Phosphorus | P | 0.03% Max |
| Sulfur | S | 0.01% Max |
| Chromium | Cr | 24.00 – 26.00% |
| Nickel | Ni | 6.00 – 8.00% |
| Molybdenum | Mo | 3.00 – 4.00% |
| Tungsten | W | 0.50 – 1.00% |
| Copper | Cu | 0.50 – 1.00% |
| Nitrogen | N | 0.20 – 0.30% |
| Iron | Fe | Balance |
The table reports Tensile Strength: 750 Minimum MPa; Yield Strength: 550 Minimum MPa; Elongation: 25 Minimum %; Hardness: 270 Maximum HB as reference data for ZERON 100. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | 750 Minimum | MPa |
| Yield Strength | 550 Minimum | MPa |
| Elongation | 25 Minimum | % |
| Hardness | 270 Maximum | HB |
ZERON 100 provides a combination of high mechanical strength and exceptional corrosion resistance for severe industrial and offshore service conditions.
Provides excellent resistance to pitting and crevice corrosion in aggressive environments.
The duplex microstructure provides high strength compared with many conventional stainless steels.
Performs effectively in chloride- containing environments including demanding marine service.
Offers good resistance to chloride stress corrosion cracking under suitable service conditions.
ZERON 100 is selected for demanding applications requiring high strength and exceptional corrosion resistance.
Offshore and subsea equipment exposed to demanding corrosive service conditions.
Components exposed to seawater and aggressive chloride-containing environments.
Process equipment requiring reliable corrosion resistance in aggressive media.
High-strength corrosion-resistant components for demanding industrial systems.
Consider chloride concentration, chemical composition and operating temperature when selecting ZERON 100.
Appropriate fabrication and welding procedures are required to maintain the duplex structure and material performance.
Extended exposure to elevated temperatures should be evaluated carefully to maintain toughness and corrosion resistance.
The commonly listed Werkstoff / EN cross-reference for ZERON 100 is 1.4501. Treat this as a grade comparison, not a guarantee of interchangeability. Verify chemistry, product form, condition and governing specification against the supplier certificate before substitution.
It is commonly used in offshore, marine, oil and gas, chemical processing, pumps, valves and corrosion-resistant equipment.
Yes. ZERON 100 offers excellent resistance to pitting, crevice corrosion and chloride stress corrosion cracking in suitable environments.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.