UNS S32950 Bolting Products
UNS S32950 is listed in the DUPLEX STAINLESS STEEL material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for UNS S32950 lists Carbon (C): 0.03% Max; Manganese (Mn): 2.00% Max; Silicon (Si): 0.60% Max; Phosphorus (P): 0.035% Max. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for UNS S32950 lists Tensile Strength: 620 – 880 MPa; Yield Strength: 450 Minimum MPa; Elongation: 20 Minimum %; Hardness: 260 Maximum HB. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
Werkstoff / EN cross-reference for UNS S32950: 1.4460. This comparison does not guarantee interchangeability; confirm chemistry, product form and condition against the governing specification.
View Technical Information →Standard identification and material designation information for UNS S32950.
The reference chemistry table lists Carbon (C): 0.03% Max; Manganese (Mn): 2.00% Max; Silicon (Si): 0.60% Max; Phosphorus (P): 0.035% Max. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element | Symbol | Composition |
|---|---|---|
| Carbon | C | 0.03% Max |
| Manganese | Mn | 2.00% Max |
| Silicon | Si | 0.60% Max |
| Phosphorus | P | 0.035% Max |
| Sulfur | S | 0.010% Max |
| Chromium | Cr | 26.00 – 29.00% |
| Nickel | Ni | 3.50 – 5.20% |
| Molybdenum | Mo | 1.00 – 2.50% |
| Nitrogen | N | 0.15 – 0.35% |
| Iron | Fe | Balance |
The table reports Tensile Strength: 620 – 880 MPa; Yield Strength: 450 Minimum MPa; Elongation: 20 Minimum %; Hardness: 260 Maximum HB as reference data for UNS S32950. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | 620 – 880 | MPa |
| Yield Strength | 450 Minimum | MPa |
| Elongation | 20 Minimum | % |
| Hardness | 260 Maximum | HB |
UNS S32950 provides a useful combination of duplex stainless steel strength, corrosion resistance and good performance in demanding industrial environments.
The duplex microstructure provides higher mechanical strength than many conventional austenitic stainless steels.
Provides good resistance to general corrosion and demanding industrial environments.
Chromium, molybdenum and nitrogen contribute to improved resistance in chloride-containing environments.
Can be fabricated and welded using appropriate procedures designed for duplex stainless steels.
UNS S32950 is selected for applications requiring high strength and corrosion resistance in demanding industrial service environments.
Equipment and components requiring strength and corrosion resistance in demanding processing environments.
Process equipment and components exposed to corrosive chemicals and industrial media.
Components used in marine and chloride- containing service environments.
Pumps, valves, piping and fabricated equipment requiring reliable material performance.
Consider chemical composition, chloride concentration and operating temperature when selecting UNS S32950.
Appropriate fabrication and welding procedures are required to maintain the duplex material structure and corrosion resistance.
UNS S32950 is suitable where higher strength and good corrosion resistance are required compared with conventional stainless steels.
The commonly listed Werkstoff / EN cross-reference for UNS S32950 is 1.4460. Treat this as a grade comparison, not a guarantee of interchangeability. Verify chemistry, product form, condition and governing specification against the supplier certificate before substitution.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.