Alloy 59 Bolting Products
Alloy 59 is listed in the HASTELLOY ALLOY material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for Alloy 59 lists Nickel (Ni): Balance / base metal; Chromium (Cr): Grade specific; Molybdenum (Mo): Grade specific; Tungsten (W): Grade specific. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for Alloy 59 lists Tensile Strength: Grade / condition dependent MPa; Yield Strength: Grade / condition dependent MPa; Elongation: Grade / condition dependent %; Hardness: Grade / condition dependent HB / HRC. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
Werkstoff / EN cross-reference for Alloy 59: 2.4605. This comparison does not guarantee interchangeability; confirm chemistry, product form and condition against the governing specification.
View Technical Information →Standard identification and material designation information for Alloy 59.
The reference chemistry table lists Nickel (Ni): Balance / base metal; Chromium (Cr): Grade specific; Molybdenum (Mo): Grade specific; Tungsten (W): Grade specific. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element | Symbol | Composition |
|---|---|---|
| Nickel | Ni | Balance / base metal |
| Chromium | Cr | Grade specific |
| Molybdenum | Mo | Grade specific |
| Tungsten | W | Grade specific |
| Iron | Fe | Grade specific |
| Cobalt | Co | Grade specific |
| Carbon | C | Grade specific |
| Other elements | — | According to applicable specification |
The table reports Tensile Strength: Grade / condition dependent MPa; Yield Strength: Grade / condition dependent MPa; Elongation: Grade / condition dependent %; Hardness: Grade / condition dependent HB / HRC as reference data for Alloy 59. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | Grade / condition dependent | MPa |
| Yield Strength | Grade / condition dependent | MPa |
| Elongation | Grade / condition dependent | % |
| Hardness | Grade / condition dependent | HB / HRC |
Hastelloy alloys are nickel-based engineering materials developed for severe corrosion, high-temperature and chemical-processing service. Final selection should be based on the actual operating environment and the requirements of the applicable material standard.
Performance is grade-specific and can be tailored to oxidizing, reducing, chloride or chemical service conditions.
Selected grades retain useful mechanical or corrosion-resistant performance at elevated service temperatures.
Chemistry, heat treatment and mechanical requirements should be checked against the exact grade and product standard.
Material suitability depends on pressure, temperature, corrosion mechanism, fastener loading and fabrication condition.
Hastelloy materials are selected for applications where the grade-specific combination of corrosion resistance, temperature capability and mechanical performance is appropriate.
Used for corrosion-resistant equipment, piping and fasteners exposed to aggressive chemical media.
Selected grades are used in oxidizing and reducing acid environments.
Applicable grades provide resistance in demanding aqueous and chloride-containing environments.
Certain grades retain useful corrosion resistance and strength at elevated temperatures.
Confirm the exact alloy designation, product form, heat treatment and intended service environment before specifying bolting.
Use grade-specific certified mechanical data for preload, torque, strength and temperature calculations.
Check compatibility with the actual process media, pressure, temperature and galvanic conditions for the intended installation.
The commonly listed Werkstoff / EN cross-reference for Alloy 59 is 2.4605. Treat this as a grade comparison, not a guarantee of interchangeability. Verify chemistry, product form, condition and governing specification against the supplier certificate before substitution.
Suitability depends on the exact grade, product condition, temperature and required mechanical properties. Check the governing standard before use.
Hastelloy grades are selected for demanding corrosion environments, but resistance varies significantly by grade and process chemistry.
Hastelloy materials are used in specialized bolting, chemical processing, power, marine, aerospace and other engineering applications depending on grade.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.