UNS C22000 Bolting Products
UNS C22000 is listed in the BRASS material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for UNS C22000 lists Designation: UNS C22000; Material family: Brass; Composition limits: Use the applicable material/product specification and certified material test report. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for UNS C22000 lists Tensile Strength: Condition and product-form dependent; Yield / Proof Strength: Condition and product-form dependent; Elongation: Condition and product-form dependent; Hardness: Condition / heat-treatment dependent. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
No one-to-one Werkstoff number was verified for UNS C22000 in the cross-reference sources checked for this update. Confirm any proposed EN alternative against the governing specification.
View Technical Information →Standard identification and material designation information for UNS C22000.
The reference chemistry table lists Designation: UNS C22000; Material family: Brass; Composition limits: Use the applicable material/product specification and certified material test report. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element | Symbol | Composition |
|---|---|---|
| Designation | UNS C22000 | |
| Material family | Brass | |
| Composition limits | Use the applicable material/product specification and certified material test report |
The table reports Tensile Strength: Condition and product-form dependent; Yield / Proof Strength: Condition and product-form dependent; Elongation: Condition and product-form dependent; Hardness: Condition / heat-treatment dependent as reference data for UNS C22000. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | Condition and product-form dependent | |
| Yield / Proof Strength | Condition and product-form dependent | |
| Elongation | Condition and product-form dependent | |
| Hardness | Condition / heat-treatment dependent |
UNS C22000 combines the characteristics of its material family with grade-specific alloying and heat-treatment behavior suited to its intended service.
Microstructure and magnetic response depend on the exact alloy, processing route and condition; confirm these properties for the supplied grade.
Offers useful resistance to atmospheric and general industrial corrosion.
Selected grades can offer practical machinability for fabricated and machined parts.
Product form, processing and condition affect strength and dimensional stability; use certified data for the supplied material.
UNS C22000 is selected for engineered components and bolting where the material characteristics of this grade match the service environment.
UNS C22000 may be suitable when its certified grade and condition meet the application requirements; confirm against the governing material specification.
UNS C22000 may be suitable when its certified grade and condition meet the application requirements; confirm against the governing material specification.
UNS C22000 may be suitable when its certified grade and condition meet the application requirements; confirm against the governing material specification.
UNS C22000 may be suitable when its certified grade and condition meet the application requirements; confirm against the governing material specification.
Confirm the applicable product specification and heat treatment.
Check corrosion and temperature exposure before selection.
Consider weldability and magnetic requirements for the application.
No one-to-one Werkstoff number was verified for UNS C22000 in the cross-reference sources checked for this update, so this page does not assign a number. Confirm any proposed EN alternative against the applicable product standard and supplier certificate before substitution.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.