Nitronic 50 Bolting Products
Nitronic 50 is listed in the AUSTENITIC STAINLESS STEEL material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for Nitronic 50 lists Chromium (Cr): Corrosion-resistant alloying element; Nickel (Ni): Austenite stabilizer; Nitrogen (N): Strengthening addition; Manganese / silicon (Mn / Si): Grade-dependent additions. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for Nitronic 50 lists Tensile Strength: Condition and product-form dependent —; Yield Strength: Condition and product-form dependent —; Elongation: Condition and product-form dependent %; Hardness: Grade and condition dependent —. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
Werkstoff / EN cross-reference for Nitronic 50: 1.3964. This comparison does not guarantee interchangeability; confirm chemistry, product form and condition against the governing specification.
View Technical Information →Standard identification and material designation information for Nitronic 50.
The reference chemistry table lists Chromium (Cr): Corrosion-resistant alloying element; Nickel (Ni): Austenite stabilizer; Nitrogen (N): Strengthening addition; Manganese / silicon (Mn / Si): Grade-dependent additions. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element / feature | Symbol | Grade information |
|---|---|---|
| Chromium | Cr | Corrosion-resistant alloying element |
| Nickel | Ni | Austenite stabilizer |
| Nitrogen | N | Strengthening addition |
| Manganese / silicon | Mn / Si | Grade-dependent additions |
| Other elements | — | Limits controlled by applicable specification |
The table reports Tensile Strength: Condition and product-form dependent —; Yield Strength: Condition and product-form dependent —; Elongation: Condition and product-form dependent %; Hardness: Grade and condition dependent — as reference data for Nitronic 50. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | Condition and product-form dependent | — |
| Yield Strength | Condition and product-form dependent | — |
| Elongation | Condition and product-form dependent | % |
| Hardness | Grade and condition dependent | — |
Nitronic 50 is a nitrogen-strengthened austenitic stainless steel known for high strength, good corrosion resistance and strong performance in demanding wear and marine environments. Key performance features vary by grade and condition.
Nitronic 50 is selected when high strength is important in service.
The grade provides good corrosion resistance, subject to product form and specification.
This characteristic supports use of Nitronic 50 in appropriate industrial environments.
Performance depends on the certified material condition and governing specification.
Nitronic 50 is selected for bolting and engineered components where its corrosion, temperature or fabrication characteristics match the service environment.
Typical applications include marine and offshore components. Confirm suitability against the project specification, temperature, media and product condition.
Typical applications include valve and pump components. Confirm suitability against the project specification, temperature, media and product condition.
Typical applications include fasteners and bolting. Confirm suitability against the project specification, temperature, media and product condition.
Typical applications include wear-resistant components. Confirm suitability against the project specification, temperature, media and product condition.
Consider corrosion environment, temperature, product form, fastener size, heat treatment and the governing specification when selecting Nitronic 50.
Corrosion Resistance: Nitronic 50 is intended for corrosion-resistant service, but actual performance depends on the environment, concentration, temperature and surface condition.
Mechanical Requirements: use certified mechanical properties for the exact grade, product form and condition; do not substitute generic family values for design allowables.
The commonly listed Werkstoff / EN cross-reference for Nitronic 50 is 1.3964. Treat this as a grade comparison, not a guarantee of interchangeability. Verify chemistry, product form, condition and governing specification against the supplier certificate before substitution.
Typical applications include marine and offshore components, valve and pump components, fasteners and bolting. Suitability depends on service environment and product condition.
Yes. Tensile strength, yield strength, elongation and hardness vary with product form, heat treatment, cold work, section size and the governing specification.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.