AISI 317 Bolting Products
AISI 317 is listed in the AUSTENITIC STAINLESS STEEL material family. The reference data below should be checked against the governing product specification, product form and delivery condition before selection or certification.
The reference chemistry table for AISI 317 lists Chromium (Cr): Primary corrosion-resistant alloying element; Nickel (Ni): Austenite stabilizer; Molybdenum (Mo): Improves resistance to pitting and crevice corrosion; Nitrogen / stabilizer (N / Ti / Nb): Varies by grade suffix. Confirm exact limits and analysis tolerances against the governing standard and product form.
The mechanical-property table for AISI 317 lists Tensile Strength: Condition and product-form dependent —; Yield Strength: Condition and product-form dependent —; Elongation: Condition and product-form dependent %; Hardness: Grade and condition dependent —. These are reference entries; supplied condition, dimensions, test method and governing specification control the requirements, and the figures are not design allowables.
Werkstoff / EN cross-reference for AISI 317: 1.4449. This comparison does not guarantee interchangeability; confirm chemistry, product form and condition against the governing specification.
View Technical Information →Standard identification and material designation information for AISI 317.
The reference chemistry table lists Chromium (Cr): Primary corrosion-resistant alloying element; Nickel (Ni): Austenite stabilizer; Molybdenum (Mo): Improves resistance to pitting and crevice corrosion; Nitrogen / stabilizer (N / Ti / Nb): Varies by grade suffix. Confirm the governing standard, product analysis tolerances and product form before ordering.
| Element / feature | Symbol | Grade information |
|---|---|---|
| Chromium | Cr | Primary corrosion-resistant alloying element |
| Nickel | Ni | Austenite stabilizer |
| Molybdenum | Mo | Improves resistance to pitting and crevice corrosion |
| Nitrogen / stabilizer | N / Ti / Nb | Varies by grade suffix |
| Other elements | — | Limits controlled by applicable specification |
The table reports Tensile Strength: Condition and product-form dependent —; Yield Strength: Condition and product-form dependent —; Elongation: Condition and product-form dependent %; Hardness: Grade and condition dependent — as reference data for AISI 317. Actual requirements depend on condition, dimensions, test method and specification; these values are not design allowables.
| Property | Value | Unit |
|---|---|---|
| Tensile Strength | Condition and product-form dependent | — |
| Yield Strength | Condition and product-form dependent | — |
| Elongation | Condition and product-form dependent | % |
| Hardness | Grade and condition dependent | — |
AISI 317 is a higher-alloy austenitic stainless steel with increased chromium, nickel and molybdenum compared with common 304-series grades, supporting demanding chemical service. Key performance features vary by grade and condition.
AISI 317 is selected when high corrosion resistance is important in service.
The grade provides molybdenum-bearing, subject to product form and specification.
This characteristic supports use of AISI 317 in appropriate industrial environments.
Performance depends on the certified material condition and governing specification.
AISI 317 is selected for bolting and engineered components where its corrosion, temperature or fabrication characteristics match the service environment.
Typical applications include chemical processing. Confirm suitability against the project specification, temperature, media and product condition.
Typical applications include pulp and paper equipment. Confirm suitability against the project specification, temperature, media and product condition.
Typical applications include process equipment. Confirm suitability against the project specification, temperature, media and product condition.
Typical applications include corrosive-service bolting. Confirm suitability against the project specification, temperature, media and product condition.
Consider corrosion environment, temperature, product form, fastener size, heat treatment and the governing specification when selecting AISI 317.
Corrosion Resistance: AISI 317 is intended for corrosion-resistant service, but actual performance depends on the environment, concentration, temperature and surface condition.
Mechanical Requirements: use certified mechanical properties for the exact grade, product form and condition; do not substitute generic family values for design allowables.
The commonly listed Werkstoff / EN cross-reference for AISI 317 is 1.4449. Treat this as a grade comparison, not a guarantee of interchangeability. Verify chemistry, product form, condition and governing specification against the supplier certificate before substitution.
Typical applications include chemical processing, pulp and paper equipment, process equipment. Suitability depends on service environment and product condition.
Yes. Tensile strength, yield strength, elongation and hardness vary with product form, heat treatment, cold work, section size and the governing specification.
Our engineering team can help you select suitable materials based on operating temperature, pressure and service conditions.